Here you will learn how to setup wifi network, how wireless fidelity works, hotspot security, vpn servers. Wi-Fi or wireless fidelity is meant for to be used when referring any type of 802.11 network, whether 802.11, 802.11a and dual band. Any products tested and approved as Wi-Fi certified by the Wi-Fi alliance are interoperable with each other.
Typically, any Wi-Fi product using the same radio frequency will work with each other even if not Wi-Fi certified. Formerly the term Wi-Fi was used only in the place of the 2.4 GHz 802.11b standard in the same way Ethernet was used.
Wi-fi short for wireless fidelity refers to a set of wireless networking technologies and more specifically referred to as any type of 802.11 network, 802.11b and 802.11a and dual band. The word Wi-Fi was built by an organization named as Wi-Fi alliance. A product that undergoes the Wi-Fi alliance analyses is given the name Wi-Fi certified.
Wi-Fi rapidly gained the fame in the United States with the access point. These devices tested by the “Wi-Fi alliance” are used around the world and allow users to have Wi-Fi capable device like a PDA or Laptop to connect anywhere there is availability of Wi-Fi access point. There are currently three standards that are used to signify the speed of the connection. Both the 802.11a and 802.11b are the capable of 54 Mbps with 802.11a additional features. The most common standard is 802.11b/second because it can transmit the data at 11 Mbps.
All these Wi-Fi connections are fast enough to allow the broadband internet connection. Wireless Fidelity is a fastest growing wireless technology that will probably be as common as phone lines and electric devices. Wi-Fi adds great levels of convenience and high level of production.
Wireless fidelity is planned to be used with the wireless devices but it is most commonly used for internet access. With Wi-Fi you can connect computers in your home, office or anywhere without the need of wires. The computers can just connect to the network that uses radio waves.
How does W-Fi work?
Wi-Fi is the wireless technology to handle the networking/communication. Wi-Fi allocates internet connection globally and to be transmitted by the radio waves. Radio waves are the main cause of Wi-Fi. Radio waves are transmitted from antenna and Wi-Fi receivers pick them up. When a user receives the Wi-Fi signals, a wireless internet connection is produced and a user is prompted to provide the user name and password if required to establish a wireless connection.
What is Wi-Fi Security?
Wi-Fi maintains certain security issues. WEP or Wired Equivalent Privacy is used in the physical and data link layers. It was planned to provide the wireless security by protecting the data, while it transmits from one point to another. Wi-Fi networking usually maintained inside a building premises. The data transmission in the Wi-Fi is protected by Wireless LANs but due to the fact that data travels over the radio waves so there are chance that data can be exposed and capture.
How to secure your WiFi network?
When you buy a wireless router you might find an Installation CD by vendor that CD with guide you through a wizard on setting up router. Here are some suggestions that how can you setup security on the router without using the application software.
1. Open a new browser.
2. You may now type IP address of the router in your browser. The step here is where you can get the management system of the router. Due to different vendors, you need to lookup on your router’s manual for the IP address usually it may be 10.10.10.01, 196.168.1.1 or 192.168.0.1, 100.100.100.1 or something similar to those matches and the default password of the router. Every router management console is different from each other. Try exploring around and find the appropriate section to manage.
3. You should never forget this step to setup an administrative password. The step to set here is often not located in Security section; you will need to take a look at the utilities, user management or system settings. Find it and change the password immediately for any user account.
4. Enable Wireless security. To turn on your encryption look under the wireless security tab. The step over here will need you to either use WPA or WPA-PSK and this will only appropriate if the devices on your network supported it. Otherwise you will need 128-bit WEP. For WPA or WPA-PSK, you would have to type pass phrase/password into a piece of paper and transfer to thumb drive so that you can set the password in the client’s machines.
5. Change your SSID. You should not make your SSID this will be probably a default SSID, normally those who do not configure their SSID will have their router name such as “linksys”, “belkin”, “dlink” etc. Try changing it with someone menacing, which will be threat for them to connect. Like virus geek, virus spreader. Remember that you will need this SSID when you browse through the network from your client machines. You can find these settings in the section of Channel or SSID.
6. Save your configurations and settings by pressing the save changes or save settings button. You will need to save every change that you will make to the router in order to it can take effect and probably you will have to reboot your router multiple times.
Congratulations, finally you have covered the basic settings for your Wi-Fi network
Wi-Fi Hotspot Security: Using VPNs
There are numerous security issues regarding the use of the public wireless networks but all of which can be overcome. One of the solutions for users, as brought up in Wi-Fi Hotspot security, is to use the VPN (Virtual Private Network) to secure the real time traffic of the Wi-Fi hot spot users. Many small to large businesses provide their employees with the VPN access.
Although this access is typically put in place for employees to have the remote access to the corporate network in order to access the files and documents remotely. If you don’t have access to any VPN servers, create your own. By doing this you can remotely access the files from your office as well as other devices such as Wi-Fi video camera to keep an eye on the things while away.
When using the software-based VPN server features in Windows XP Pro, the PC running the server has to be powered-on to access the home network from the Wi-Fi hotspot. VPN routers can cost as low as $70 to $130 and the popular models are Linksys, WRV200 and WRV5G.
Read More..
Thursday, August 13, 2009
An Introduction to the Wi-Fi (Wireless Fidelity)
Friday, August 7, 2009
What is Network Routing? A tutorial about router
You will be able to find the basic network routing overview, router configuration, router working, simulations static routes and routing table. Routing is the process of defining routes for the packets to its destination through an internetwork and this is performed by the router.
Routing is consist of two separate tasks.
1. Defining paths for the packets through and internetwork.
2. Forwarding data packets based on their predefined paths.
Generally, there are two types of routing.
STATIC AND DYNAMIC ROUTING
Routing can be performed by manually defining the routes or paths for packets to reach its destination. This is called static routing.
Stating routing works well for the small networks and when using the static routing, the routing table of the each router should be updated each time there is any change in the network configuration or topology. A router, whose routing table is not regularly updated, cannot communicate with the other routers.
While on the other end in most of the networks, routing is accomplished through the use of the dynamic routing. In the dynamic routing, routing protocols, such as RIP, OSPF etc create and maintain the routing tables of each router. Practically, dynamic routing functions very well than the static routing
ROUTING TABLE
A routing table is a set or rules, viewed in a tabular format and this used to define the routes of the data packets. All the network devices, which have IP, enabled functionality such as routers and switches use the routing tables. Routing table stores the information and configurations of every router in the IP enabled network. A routing table contains the information necessary to transmit the packets toward its destination.
When a packet is received, the network devices matches the information contained in the packets and the information in the routing tables and then it defines the shortest possible route for the transmission of the packets towards its destination.
Each packet contains the information of its origin and destination and the routing table contains the following information.
• Destination: The IP address of the packet’s final destination (next hop). Next hop: The IP address to which the packet is forwarded
• Metric: It assigns the cost to each route so that most-effective paths can be picked up.
• Routes: It includes directly attached direct subnets, indirect subnets, that are not directly connected to the device but it can be accesses through one ore more hops
• Interface: The outgoing network interface the device should use when forwarding the packet to its final destination.
Routing tables can be maintained manually by the network administrator or by dynamically (automatically). The static network tables do not change unless the network administrator changes them. Routing tables can be maintained manually or dynamically. Tables for static network devices do not change unless a network administrator manually changes them. In the dynamic routing, the network devices such as routers and switches maintain the routing tables dynamically by using the routing protocols, such as RIP, OSPF etc. In the dynamic routing, the network devices listen and detect any network or devices failure and packet congestions.
Routing in the Internet
Routing is the method in which data finds its destination from one computer to the next. In the Internet there are 3 major aspects of routing.
1. Physical Address Finding
2. Determination of inter-network gateways
3. Numeric and symbolic Addresses
Physical address finding is the method of the Internet Routing and is used when datagram is transmitted from a computer. It is necessary to encapsulate the IP datagram. This encapsulation requires the local network or physical address.
If a computer wishes to transmit IP datagram it needs to encapsulate the physical address of the destination network device in the frame. This address can be achieved by using the table that will map the IP address with the physical address. Such table can be configured into a file that can be read into the memory at the boot up time. Computer normally uses the Address Resolution Protocol (ARP), which operates dynamically to maintain the translation table.
The second method is necessary because the Internet consists of a large number of local networks, which are interconnected with each other by gateways. Such gateways are known as routers, which has physical as well as logical connectivity with many networks.
The determination of the best suitable gateway and port for a particular IP address is called routing.
The third method generally involves the translation of the human friendly form (names) to the number address (IP Address). IP address can’t be remembered due to its numeric form but the simplest names (domain names) are easy to remember e.g www.yahoo.com, www.google.com, www.msn.com are easiest to remember as compared to the IP addresses 122.11.22.34, 223.45.66.76, 155.44.55.120. DNS translates the domain names into the IP address and IP address into the domain name. This domain to IP translation is a must for communicating on the Internet because communication on the Internet is performed by the IP addresses.
Communication between routers
The Internet is a network of networks. The Internet consists of large number of autonomous systems, each of which further consists of routing domains. Such autonomous systems are usually run by the larger companies or universities. Within the Autonomous system, a router communicates with the other router using the best intra domain routing protocols, which are known as interior gateway protocols. Autonomous system are connected via gateways, these exchange information using inter domain routing protocol, which are also called exterior gateway protocols.
The RIP or (Routing Information Protocol) is the commonest interior gateway protocol and the recent protocol such as open shortest path first (OSPF). The purpose of these protocols is to enable routers to exchange locally so that all the routers in the autonomous system must a have coherent and up to date information.
When a host receives the new routing information, it is likely to update not only to it but also sends this new updated information to all the connected hosts so that they can updated themselves. Hence these changes propagate across the entire network.
--networktutorials.info--
Read More..
Sunday, August 2, 2009
MultiTech 56K DATA/FAX GLOBAL MODEM EXT ( MT5634ZBA-GLOBAL-NAM )
Price:$164.20
Details
Read More..
Multi-Tech Systems V92 56Kbps Serial Fax Modem (MT5600BA)
Price:$226.32
Details
Read More..
Adtran Nt1 Ace with Power Supply Sa ISDN Bri Ntwk Termination Device
Price:$146.53
Details
The ADTRAN NT1 ACE provides the network termination for 2B1Q ISDN basic rate service. The NT1 ACE provides a 2B+D basic rate interface between the subscriber's terminal equipment and the ISDN network. Basic rate ISDN consists of two 64 kbps B channels and a single 16 kbps D channel. Connection to the ISDN network is made with a U interface. Connection to the subscriber's terminal equipment is by an S/T interface. The U and the S/T interfaces conform to ANSI and CCITT standards and perform all Layer 1 functions. The NT1 ACE is designed with aesthetics as well as functionality in mind. The unit is enclosed in an attractive, durable plastic housing appropriate for desktop use. The NT1 ACE is powered by the wall-mount power supply included with the unit. The wall mount power supply provides up to 8.9 W of power for terminal equipment. The NT1 ACE monitors the S/T interface for over current fault conditions. In the event of such a condition, the unit automatically limits the amount of delivered current until the fault condition is removed.
Read More..
ADSL2+ AR2001U ADSL Modem Internet Router w/Ethernet & USB
Price:$24.79
Details
Read More..
